BUD Industries

The NBF-32422 is a Box Enclosure made of polybutylene terephthalate (PBT)/polycarbonate (PC) with light grey body and clear cover finish. This gasketed Enclosure used in many wet, dirty and/or corrosive environments. It has two or three plastic latches,...

The AC-407 is an Aluminum Chassis with natural finish. Suitable for use with aluminum enclosures. The aluminum chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support, optional...

The PE-1600 is a 2U Panel Extender made of 14-gauge (2.0mm) steel with smooth black finish. Suitable for use with cabinet racks. It features panel mounting holes on EIA universal spacing and heavy gauge steel brackets extend panels 5-inch beyond normal...

SpecificationCover Type:Potting Box CoverAccessory Type:Cover, 1578 Series, Pack 10Cover Material:ABSCover Color:BlackFor Use With:PB-1578 Style B Potting Box EnclosuresExternal Depth - Metric:102.4mmExternal Width - Metric:54.9mmExternal Height -...

SpecificationEnclosure Type:Utility BoxEnclosure Material:ABSExternal Height - Metric:60.2mmExternal Width - Metric:117mmExternal Depth - Metric:117mmBody Color:BlackNEMA Rating:-External Height - Imperial:2.37"External Width - Imperial:4.6"External...

The AC-1407 is an Aluminium Chassis with natural finish. It is suitable for use with aluminium enclosures. The aluminium chassis is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support,...

SpecificationSlide Type:TelescopingLength:20"Extended Length:40.88mBearing Style:BallCarrying Capacity:91lbProduct Range:-Drawing SheetDownload Drawing Sheet | AS-5042-A

The HH-3600-B is a style-M hand-held Grabber Plastic Box made of acrylonitrile butadiene styrene (ABS) with black textured finish. This rectangular enclosure designed with an extra deep pocket at one end to accommodate circuit boards with tall components...

SpecificationEnclosure Material:ABSExternal Height - Metric:26.67mmExternal Width - Metric:37mmFor Use With:NEMA 4X enclosuresExternal Height - Imperial:1.05"External Width - Imperial:1.45"Product Range:-Data SheetDownload Data Sheet | MB-1390-DGDrawing...

The NBB-15247 is a light-gray NEMA Box with solid door, made of PC/PBT blended plastic. Most of these gasketed enclosures have been tested and approved to UL508-4x specifications, with a few being approved to UL50-4X. All enclosures meet NEMA 1, 4, 4x...

The PN-1339 is a NEMA 4X Box made of polycarbonate with light gray finish. This PN-series box is offered in style-1 version. Body or cover is UV stabilized. Wall mounting holes and cover attaching screws are outside the sealing area thus preventing...

The PA-1104-BT is a Cabinet Rack Panel with black aluminum body. Suitable for all cabinets, cabinet racks, relay racks and small enclosures. Metallic grey finish 4U EIA unit and type-A ...

The CU-234 is an aluminum Enclosure with close fitting flanged cover fastened to bosses in the body with screws. The thickness of the #ADC-12 aluminum alloy offers excellent screening properties. It is ideal for concealed or other interior use where a...

The SA-1753-BT is a 19-inch ventilated Equipment Open Rack Shelf made of 16-gauge steel with black texture finish and is flanged for added support. Open rack shelves fit 19 and 23-inch wide panel spaces. Supports 150Lbs...

SpecificationEnclosure Type:Utility BoxEnclosure Material:ABSExternal Height - Metric:79mmExternal Width - Metric:79mmExternal Depth - Metric:24mmBody Color:BlackNEMA Rating:-External Height - Imperial:3.11"External Width - Imperial:3.1"External Depth -...

The SNB-3732-SS is a Box Enclosure made of stainless steel with natural finish. This device includes hardware and clear zinc plate internal panel. It is well suited for outdoor and indoor applications requiring protection against liquids and corrosion...

SpecificationEnclosure Type:MultipurposeEnclosure Material:PolycarbonateExternal Height - Metric:170.9mmExternal Width - Metric:120.9mmExternal Depth - Metric:55.1mmIP Rating:IP65Body Color:GrayNEMA Rating:NEMA 1, 2, 4, 4X, 12, 13External Height -...

The CU-388 is a style-G Plastic Utility Box made of acrylonitrile butadiene styrene (ABS) with black finish. It comes with close fitting interlocking lid and assembly hardware. UL94V-0 Flammability rating -20...

The CU-3286-MB is a style-A Plastic Utility Box made of acrylonitrile butadiene styrene (ABS) with black textured finish. It has moulded-in mounting brackets, comes with close fitting interlocking lid and assembly hardware. ...

The NBE-10567 is a Style E Non-metallic Enclosure made of ABS (acrylonitrile butadiene styrene)/PC with light gray finish. This NBA-series enclosure designed to IP66 of IEC 529 and NEMA 1, 4 and 4x specifications. Clear...

The TS-16 is a din rail mount Tem-Stat Temperature Control with light-gray plastic housing and blue dial. Prevent shut-downs caused by over-heating of electronic or electrical equipment in enclosures. Units react quickly to gradual or sudden temperature...

The BT-2742 is a transparent Box Enclosure made of polycarbonate with blue finish. It is ideal for PCB enclosures, test equipment and other applications in the electrical and electronic industries. This plastic enclosure allows easy monitoring of...

The NBF-32318 is a style A NEMA Box solid door, made of PBT (polybutylene terephthalate) or PC (polycarbonate) with light gray finish. The NBF-series enclosure designed to IP66 of IEC 529 and NEMA 1, 2, 4 and 4x specifications. This outdoor enclosure...

SpecificationAccessory Type:Chassis Bottom PlatePlate Type:BottomPlate Material:AluminumPlate Color:NaturalFor Use With:AC-1413 Aluminum ChassisExternal Depth - Metric:147.6mmExternal Width - Metric:198.4mmExternal Height - Metric:3.81mmExternal Depth -...

The CU-728 is a small metal Utility Cabinet made of 20-gauge steel with metallic gray (MG) finish. This economical cabinet/small metal electronics enclosure has removable front and back panels. Panels affixed with 6# sheet metal screws. ...

The DNC-4796 is a Mounting Clip that allows mounting of small enclosures and other devices that don't have a built-in DIN rail mounting flange to a 35mm DIN rail. It is easy to install and requires drilling of one 4.3mm diameter hole in the mounting...

SpecificationEnclosure Type:SmallEnclosure Material:Diecast AluminumExternal Height - Metric:81.5mmExternal Width - Metric:119mmExternal Depth - Metric:188mmBody Color:BlackNEMA Rating:-External Height - Imperial:3.21"External Width - Imperial:4...

The CU-3243 is a style-I Plastic Utility Box made of acrylonitrile butadiene styrene (ABS) with black textured finish. It has internal PCB mounting bosses. UL94-5VA Flammability rating Insert in top allows...

The CU-3283 is a textured Utility Box, made of ABS plastic material with flammability rating of UL94-5VA and suggested service temperature of -20°C to +70 °C. Style-A utility box EMI/RFI shielding ...

The BPA-1527 is a Bottom Plate fits all chassis sizes. It is used to protect wiring or components or as a dust cover on underside chassis. It is made from 0.04-inch thick aluminium with natural finish. Applications ...

The H-9166-B is a Handle made of brass with chrome plated finish. It includes two 6-32 x 0.50-inch screws. 1.9"-Mounting centre Applications ...

The CU-247 is a Multipurpose Enclosure made of die-cast aluminum with natural finish. This plus the thickness of the aluminum alloy, offers excellent screening properties. This lightweight, easy to machine die-cast aluminum enclosure/Econobox has a...

SpecificationEnclosure Type:SmallEnclosure Material:AluminumExternal Height - Metric:203.2mmExternal Width - Metric:257mmExternal Depth - Metric:203mmBody Color:Metallic GreyNEMA Rating:-External Height - Imperial:8"External Width - Imperial:10...

SpecificationEnclosure Material:SteelExternal Height - Metric:55.6mmExternal Width - Metric:800.1mmFor Use With:21.00" Panel SpaceExternal Height - Imperial:2.19"External Width - Imperial:31.5"Product Range:-Drawing SheetDownload Drawing Sheet | PMR-9449

The NG-9515 is a Cable Gland with PG-16 mount thread, nylon 6.6 (UL94V-2) body, nut and NBR rubber cable seal, washer gasket. Black color. Suitable for use with NEMA boxes. IP68 Protection rating ...

The NBB-10271 is a Box Enclosure with water-tight plastic and fibreglass. It is made from polycarbonate with light grey finish, suitable to use in many wet, dirty and/or corrosive environments. IP66, NEMA 1, 4, 4x...

The PN-1328-DG is a Box Enclosure made of high-impact ABS plastic with dark grey body and cover finish. This moulded enclosure meets NEMA 1, 2, 4, 4x, 12 and 13 specifications and is ideal for PCB enclosures, junction boxes and other applications in the...

The CS-11204-BT is a Champion Electronics Cabinet made of thick aluminium with black texture finish. It has ventilation slots in bottom and rear panel, eight self-threading screws for easy assembling and no screws on front or rear panels. This Cabinet...

The AC-431 is an Enclosure/Chassis made of sturdy aluminum alloy with natural finish. Each is welded at stress points for assured, maximum strength and rigidity. Sides folded in at bottom for additional support. Optional bottom plate is easily attached...

SpecificationPanel Type:Inner PanelPanel Material:PlasticBody Color:GrayFor Use With:NBD-10449, NBD-10469External Height - Metric:251.5mmExternal Width - Metric:312mmExternal Height - Imperial:9.9"External Width - Imperial:12.3"Product Range:-Data...